Hyundai Technical Service Bulletin 04-40-013: Transaxle, Increased Clutch Durability.pdf
Hyundai Technical Service Bulletin (Hyundai TSB) for Hyundai Santa FE 2.4 L, for Transaxle group. It informs how to increase the durability of the clutch of Hyundai Santa FE 2.4
Toyota Collision Repair Information - Prius Emergency Response Guide.pdf
Reviewing the Emergency Response Guide DOES NOT qualify collision repair technicians to service any Toyota Hybrid System (THS) components in the all–new Prius.
Only a Toyota Hybrid System qualified technician can perform THS service.
Specific collision repair and body panel replacement procedures can be found in the Prius Repair Manual for Collision Damage (PN 00400–BRM09–6E). Order through your Toyota dealership or by calling the Toyota Material Distribution Center at 1–800–622–2033.
The purpose of this bulletin is to provide and promote safety precautions when handling a collision damaged Prius.
Toyota Collision Repair Information - Welding High Strength Steel (H.S.S.).pdf
Taken from REPAIR GUIDELINES
H.S.S. and ordinary steel parts in Toyota vehicles are welded using the same methods. The following precautions apply:
Use either spot welding or MIG/MAG (shield gas) welding. MIG/MAG (shield gas) welding should only be done by an experienced body shop person.
Only braze body components previously brazed at the factory and as indicated in the Toyota Repair Manual for Collision Damage.
Do not use an oxy–acetylene torch for fusion welding auto bodies. The large heat affected zone may destroy galvanized coatings and cause excessive panel distortions. In addition, an oxy–acetylene torch will reduce the strength and increase the brittleness of H.S.S.
Technical Service Bulletin: BMW ZF 5-HP-30 No Reverse.pdf
This technical service bulletin informs correction of the bmw owner’s complain by installing a 0.25″ diameter checball into the bathtub in the channel plate
Figure/Schematic available: ZF-5HP-30 Channel Plate Lower Valve Body Side, Upper Rear Valve Body Checkball Location, ecploded diagram of A/C Clutch Housing Components.
Jaguar XK8 Technical Service Bulletin S307-01: Selector Lever Cable - Adjustment Procedure - Not In Workshop Manual.pdf
Procedures covered: Adjusting of Transmission Selector Cable (including Cable Sheath Locknuts diagram & Transmission Lever diagram).
You might also be interested in reading:hyundai tsb
-
Subscribe!
-
Categories
- Automotive Ebooks
- Aviation Ebooks
- Business Ebooks
- Engineering Ebooks
- Gadget Ebooks
- Hardware Ebooks
- Health & Medical Ebooks
- Hobbies Ebooks
- Home & Family
- Home Appliance Ebooks
- Human Resource & Self Improvement Ebooks
- Math & Science Ebooks
- Programming, Technology Ebooks
- Recreational, Sport & Martial Art Ebooks
- Social & Culture ebooks
-
Tags
-
Donation
This site has required a great deal of money, time and effort to develop & maintain. If it's been useful to you then you can support this site by making a small donation. This will act as an incentive for me to carry on maintaining it, providing countless hours of hardwork, and including any updates that are suggested.
FACT: US $200/month for Dedicated Server Hosting (and still running out of bandwith) + US $80/month for internet connection + hundred hours of working/month.
-
Meta