s p o n s o r e d   l i n k s

microprocessor book download

OKIData Microline 395/395C Service Handbook.pdf

April 22, 2009 · Filed Under OKIData · Comment  · Tags: , , ,

Taken from General Information: The Microline 395 is a high speed, dot matrix printer, which utilizes a 24 wire printhead. The Microline 395 comes standard with both an RS232-C Serial Interface and a Centronics Parallel Interface. The printer is available in either a standard version (Microline 395; single color output) or a color capable version (Microline 395C; multiple color output). The Microline 395 is capable of emulating the Epson LQ 850/1050 or the IBM Proprinter XL24 printers. The Microline 395C emulates the Epson LQ 2550, Epson LQ850/1050 or the IBM Proprinter XL24.

s p o n s o r e d   l i n k s


Intel StrongARM SA-1110 Microprocessor Developer’s Manual.pdf

The Intel StrongARM* SA-1110 Microprocessor (SA-1110) is a highly integrated communications microcontroller that incorporates a 32-bit StrongARM RISC processor core, system support logic, multiple communication channels, an LCD controller, a memory and PCMCIA controller, and general-purpose I/O ports.As do the Intel StrongARM SA-110 Microprocessor (SA-110) and Intel StrongARM SA-1100 Microprocessor (SA-1100), earlier members of the StrongARM family, the SA-1110 provides power efficiency, low cost, and high performance. Figure 1-1 shows the features of the SA-1110. The shaded boxes are features that have carried over with few or no changes from the SA-110. The nonshaded boxes are new or updated features for the SA-1110; most of the features are equivalent to that of the SA-1100. The SA-1110 differs from the SA-1100 only in the features of its memory and PCMCIA controller.

Technical Notes on the EEC-IV MCU.pdf

February 2, 2009 · Filed Under Others · Comment  · Tags: ,

The EEC-IV design began in 1978 and was first introduced in 1983 in the 1.6L Escort, Lynx, EXP and LN7 cars. It has gone through several major physical changes, the earliest using a fairly simple two board design with through hole soldered components while the last are more current in technology, showing extensive use of surface mount components and a much more finished and complex appearance. In between, there appears to be a variety of mother/daughter board and other designs. Still, they are all called EEC-IV, although somewhere in its life there was a Ford P/N generational change.

Embedded System Design Using 8031 Microcontrollers.pdf

Intel 8031 is the most popular and most used architecure in the 8 bit segment, it also can be found in a variety of configurations, flavour and you just cannot see this kind of variations with any other architecture, even after 25 years of existence, semiconductor manufacturers still come out with somekind of device useing thins 8031 core.

Apple Computer Co. Apple-1 Operation Manual.pdf

September 5, 2008 · Filed Under Operating System · Comment  · Tags: ,

Contents: Introduction; Section I Getting the System Running; Section II Using the System Monitor; Section III How to Expand the Apple System




You might also be interested in reading:
microprocessor books, microprocessor book download, microprocessor book, free download microprocessor books