microcontroller free books
Intel StrongARM SA-1110 Microprocessor Developer’s Manual.pdf
The Intel StrongARM* SA-1110 Microprocessor (SA-1110) is a highly integrated communications microcontroller that incorporates a 32-bit StrongARM RISC processor core, system support logic, multiple communication channels, an LCD controller, a memory and PCMCIA controller, and general-purpose I/O ports.As do the Intel StrongARM SA-110 Microprocessor (SA-110) and Intel StrongARM SA-1100 Microprocessor (SA-1100), earlier members of the StrongARM family, the SA-1110 provides power efficiency, low cost, and high performance. Figure 1-1 shows the features of the SA-1110. The shaded boxes are features that have carried over with few or no changes from the SA-110. The nonshaded boxes are new or updated features for the SA-1110; most of the features are equivalent to that of the SA-1100. The SA-1110 differs from the SA-1100 only in the features of its memory and PCMCIA controller.
Embedded System Design Using 8031 Microcontrollers.pdf
Intel 8031 is the most popular and most used architecure in the 8 bit segment, it also can be found in a variety of configurations, flavour and you just cannot see this kind of variations with any other architecture, even after 25 years of existence, semiconductor manufacturers still come out with somekind of device useing thins 8031 core.
Muscle Machines.pdf
Good pdf reference material on muscle machine past, present and the future, incorporating hydraulic and microcontroller device.
Maxim - High-Speed Microcontroller User’s Guide.pdf
In addition to improved efficiency, most devices can operate at a maximum clock rate of 33MHz or 40MHz. Combined with the three times performance, this allows for a maximum performance equivalent to a 99MHz or 120MHz 8051. This level of computing power is comparable to many 16-bit processors, but without the added expense.
Maxim - Ultra-High-Speed Flash Microcontroller User’s Guide.pdf
The fundamental innovation of the ultra-high-speed flash microcontroller is the use of only one clock per instruction cycle compared with 12 for the original 8051. This results in up to 12 times improvement in performance over the original 8051 architecture and up to four times improvement over other Dallas Semiconductor high-speed microcontrollers. The device provides several peripherals and features in addition to all of the standard features of an 80C32.

