P-51D Mustang Instruction Manual.pdf

The Great Planes P-51D Mustang is a semi-scale (approximately 1/8-scale) model of the full-size North American P-51D. The prototype as pictured on the box cover is not a copy of any one full-size airplane in particular. Rather, we selected several typical trim features from several aircraft, making a good-looking and rather “generic” trim scheme that typifies the Mustang we all know.

This is not a beginner’s airplane! While the P-51D is easy to build and flies great, we must discourage you from selecting this kit as your first R/C airplane. It is fast, highly maneuverable, and lacks the self-recovery characteristics of a good basic trainer such as the Great Planes PT Series airplanes. On the other hand, if you have already learned the basics of R/C flying and you are able to safely handle an “aileron trainer” airplane such as the Great Planes Trainer Series or Big Stick Series airplanes, the P-51 D is an excellent choice.

Contents:

• INTRODUCTION [ Precautions ~ Decisions You Must Make Now ~ Other Items Required ~ Supplies and Tools Needed ~ Abbreviations ~ Types of Wood ~ Get Ready to Build ~ Die Patterns ]
• TAIL FEATHERS [ Build the Fin and Rudder ~ Build the Stabilizer and Elevators ~ Temporarily Install the Hinges ]
• WING ASSEMBLY [ Build the Wing Panels ~ Join the Wing Panels ~ Install Aileron Torque Rods ~ Sand Flat on TE ' ~ Fiberglass the Center Section ~ Install Wing Tips ~ Install Ailerons ~ Temporarily Install Wing Dowels ~ Install Wing Bolt Plate ~ Fill LG Slots ~ Install Landing Gear Covers ~ Install Retracts ]
• FUSELAGE ASSEMBLY [ Prepare Fuse Sides ~ Prepare the Firewall ~ Assemble Lower Fuselage ~ Drill Engine Mount ~ Install Pushrod Guide Tubes ~ Mount Wing to Fuse ~ Fit Fuel Tank and Fuelproofing ~ Assemble Aft Deck ~ Assemble Front Deck ~ Assemble Upper Cowl ]
• FINAL ASSEMBLY [ Install Front Wing Fairing ~ Assemble Air Scoop Front ~ Install Wing Fillets ~ Mount Stab and Fin ~ Shaping and Sanding ~ Install Pushrods and Radio ~ Control Surface Throws ~ Install Receiver, etc ~ Fit Cowl ]
• FINISHING [ Additional Fuelproofing ~ Balance the Airplane Laterally ~ Final Sanding ~ Covering ~ Glue the Hinges ~ Apply Decals and Trim ~ Install Pilot ~ Glue Canopy in Place ~ Wing Seating ~ Re-install Engine & Radio ~ Balance Your Model ~ Final Hookups and Checks ]
• PRE-FLIGHT [ Charge the Batteries ~ Find a Safe Place to Fly ~ Ground Check the Model ~ Range Check Your Radio ~ Engine Safety Precautions ]
• AMA Safety Code
• FLYING
• CAUTION
• FLIGHT TRIMMING
• PARTS LIST
• 3-VIEW

This operators manual is available FREE at Hobbico website, we merely collect the information, we are neither affiliated with the author(s), the website and any brand nor responsible for its content and change of content. (Read our disclaimer here or here before you download the document from the website written above by clicking the below link).