Engineering Ebooks » Telecommunication Engineering »
Electronic Warfare and Radar Systems Engineering Handbook.pdf
Electronic Warfare and Radar Systems Engineering Handbook in pdf file, from NAVAL AIR SYSTEMS COMMAND/ NAVAL AIR WARFARE CENTER.
QUALCOMM – WCDMA Network Planning and Optimization.pdf
Taken from WCDMA Network Planning: Ensuring that the RF coverage is sufficient within the network should start naturally with a good RF network plan [2]. Network planning is, may be even
more for existing operator, an area that is too often overseen. Greenfield operator have the advantage of starting from a clean plate while incumbent operator already have a set of site that they are compelled to use even if these sites were originally acquire to fit in a network with different coverage and capacity limitation.
So what is a good RF network plan?
A good network plan should address the coverage and capacity requirement of the area considered, but also be sufficiently flexible to allow network expansion without major change of the existing sites.
In WCDMA, the coverage and capacity requirement cannot be considered independently, but should be planned at the same time with proper guidelines.
This relation between coverage and capacity is often referred to as the “breathing effect” of WCDMA. Comparing with TDMA/FDMA technologies, such as GSM, the coverage of a WCDMA network cannot be planned independently of the load on the network. The load on the network
will impact the coverage in mainly two different ways, depending on which link (Uplink or Downlink) is considered. On the uplink, as more users are added to the network, higher noise would be detected at the node Bs. This increase in noise, called rise over thermal, requires each of the phones or data cards (UE) to increase its transmit power to overcome this noise increase:
effectively the uplink coverage is reduced by this required increase in transmit power. This effect has been documented and can be summarized by the riseover-thermal versus load curve illustrated in Figure 2: as an example, when the load is 50% of the pole capacity, the coverage is reduced by a factor of 3 dB.
Universal Radio Communication Tester CMU200 – THE multiprotocol tester for current and future mobile radio networks.pdf
Taken from Testing the 3rd generation: The CMU200 is part of a complete range of mobile radio test equipment, encompassing everything from conformance test systems to system simulators, turnkey functional board test / final test systems and simple sales-counter Go/NoGo testers.
Solution Brief One Point Wireless Suite PTP LINKPlanner: No Surprises Link Planning for PTP 800 Solutions.pdf
Motorola’s One Point Wireless Suite is a comprehensive suite of software solutions that simplifies the design, deployment and management of wireless networks. From a single computer, you can plan, deploy, monitor and manage your Motorola wireless network from its inception through ongoing operations. The suite includes four powerful elements: PTP LINKPlanner, LANPlanner, MeshPlanner and Wireless Manager. A future release of Wireless Manager will support PTP 800 solutions.
iPhone Unlock Guide.pdf
This guide will allow you to easily activate and unlock your brand new iPhone running Firmware 1.1.1. Don’t worry if you’re not sure which Firmware your iPhone is running. The steps to find out which Firmware you are running are at the beginning of this guide. This unlock guide is intended for brand new iPhones that have not yet been unlocked and running Firmware 1.1.1. If you are running Firmware 1.0.2 and have not yet unlocked your iPhone just simply update it to Firmware 1.1.1 through iTunes.