s p o n s o r e d   l i n k s


2002-2004 Chevrolet Trail Blazer, GMC Envoy, Oldsmobile Bravada Body Repair Manual.pdf

September 30, 2008 · Filed Under Oldsmobile  · Tags: , , ,

Body repair manual for General Motor’s 2002 S/T Sport Utility, including Chevrolet Trail Blazer, GMC Envoy and Oldsmobile Bravada. These three Sport Utility Vehicles shares the same platform which is General Motors’ GMT360 platform, however it’s offered in different engines and features. The most popular engine used by these 3 SUV is a Vortec 4200 engine or LL8, the first Atlas engine.

One of the GMC Envoy’s engine also features Displacement on Demand engine, while Chevrolet TrailBlazer features the Active Fuel Management system on its engine.

Contents:

  • Front FrameM
    The re-designed frame assembly for the new S/T Utility is a mild, steel hydroformed frame assembly. A front frame service section consisting of the left and right frame ends, body, and radiator support mounting brackets and front connecting cross tube is available.
  • Radiator Support Assembly
    The radiator support assembly is made from mild steel hydroformed tube which is welded to the front structure. The Radiator Support Assembly is serviced as a complete assembly. The bolt-on portion of the upper tie bar (1) as well as the left and the right fascia support brackets (2) are a part of the radiator assembly. If the damage is limited to these parts, they can be ordered and replaced individually. Replacement of the radiator support assembly requires removal of the upper fender rails. Upper fender rail service extensions (3) are included with the radiator support assembly for efficient installation. If the damage permits, locate and cut off the front portion of the upper rails along the die mark indicators and install the replacement upper fender rail service extensions. This procedure must be performed on both sides of the vehicle. Left side only is shown.
  • Wheelhouse Extension Removal & Installation
  • Upper Fender Rail Removal & Installation
  • Upper Fender Rail Bracket
  • Hood Hinge Bracket
  • Windshield Pillar Sectioning
    The doorframe opening is a unique laser-weld design incorporating multiple metal thicknesses to ensure the structural integrity of the vehicle. The doorframe can be replaced at factory seams, but requires the removal of the upper fender rail, the windshield, the roof panel and the quarter panel. Sectioning procedures have been developed as a more cost-effective alternative to complete replacement. The specific area to be sectioned is determined by the extent of the damage to the vehicle. Refer to Rear Pillar Sectioning, Front Lower Pillar Sectioning, Center Pillar Sectioning, and Rocker Sectioning.
  • Front Lower Pillar Sectioning
    The doorframe opening is a unique laser-weld design incorporating multiple metal thicknesses to ensure the structural integrity of the vehicle. The doorframe can be replaced at factory seams, but requires the removal of the upper fender rail, the windshield, the roof panel and the quarter panel. Sectioning procedures have been developed as a more cost-effective alternative to complete replacement. The specific area to be sectioned is determined by the extent of the damage to the vehicle. Refer to Rear Pillar Sectioning, Windshield Pillar Sectioning, Center Pillar Sectioning, and Rocker Sectioning.
  • Center Pillar Sectioning
    The doorframe opening is a unique laser-weld design incorporating multiple metal thicknesses to ensure the structural integrity of the vehicle. The doorframe can be replaced at factory seams, but requires the removal of the upper fender rail, the windshield, the roof panel and the quarter panel. Sectioning procedures have been developed as a more cost-effective alternative to complete replacement. The specific area to be sectioned is determined by the extent of the damage to the vehicle. Refer to Front Lower Pillar Sectioning, Windshield Pillar Sectioning, Rear Pillar Sectioning, and Rocker Sectioning.
  • Rear Pillar Sectioning
    The doorframe opening is a unique laser-weld design incorporating multiple metal thicknesses to ensure the structural integrity of the vehicle. The doorframe can be replaced at factory seams, but requires the removal of the upper fender rail, the windshield, the roof panel and the quarter panel. Sectioning procedures have been developed as a more cost-effective alternative to complete replacement. The specific area to be sectioned is determined by the extent of the damage to the vehicle. Refer to the Front Lower Pillar Sectioning, Windshield Pillar Sectioning, Center Pillar Sectioning, and Rocker Sectioning.
  • Rocker Panel Sectioning
    The doorframe opening is a unique laser-weld design incorporating multiple metal thicknesses to ensure the structural integrity of the vehicle. The doorframe can be replaced at factory seams, but requires the removal of the upper fender rail, the windshield, the roof panel and the quarter panel. Sectioning procedures have been developed as a more cost-effective alternative to complete replacement. The specific area to be sectioned is determined by the extent of the damage to the vehicle. Refer to Rear Pillar Sectioning, Windshield Pillar Sectioning, Center Pillar Sectioning, and Front Lower Pillar Sectioning.
  • Body Side Hinge A Pillar & B Pillar
  • Door Side Hinge
  • Quarter Outer Sectioning
  • Rear Outer Wheelhouse
  • Extension Outer Rear Wheelhouse
  • Quarter Lower Filler
  • Roof Outer Panel
  • Dimension: Engine Compartment, Body Side, Rear Door Opening, Frame Dimension
  • Chevrolet Trail Blazer Panel Identification
  • GMC Envoy Panel Identification
  • Oldsmobile Bravada Panel Identification

This body repair manual is available FREE at GoodWrench.com website, we merely collect the information, we are neither affiliated with the author(s), the website and Oldsmobile brand nor responsible for its content and change of content. (Read our disclaimer here or here before you download the document from the website written above by clicking the below link).

Download free 2002-2004 Chevrolet Trail Blazer, GMC Envoy, Oldsmobile Bravada Body Repair Manual.pdf (74 pages pdf file, 3.5 MB).

Related posts




You might also be interested in reading:
2002 trailblazer owners manual, 2002 chevy trailblazer owners manual, 2002 trailblazer manual, trailblazer, 2002 chevy trailblazer repair manual, 02 trailblazer owners manual, vortec 4200 engine diagram, 2002 GMC Envoy Repair Manual, 2002 Trailblazer, 2004 chevy trailblazer repair manual
Next »

Disclaimer

http://www.onlinefreeebooks.net - provides you collection of links to other websites containing ebooks/manuals/cheatsheets either for computer geeks, technicians, automotive enthusiasts or programmers. We merely take the power of Google Search to find those materials and link to it. NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS.

We are neither affiliated with authors and brands nor responsible for its content and change of content.

Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.

Comments

One Response to “2002-2004 Chevrolet Trail Blazer, GMC Envoy, Oldsmobile Bravada Body Repair Manual.pdf”

  1. rondon mendanha on January 6th, 2009 9:19 pm

    por favor preciso do codigo do filtro de combustivel, para trailblazer ls 2004 motor 4.2 v6
    grato.

Leave a Reply